4-20mA Vibration Sensor
Industrypapa supplies Voxintech 4-20mA vibration sensors, a two-wire loop-powered current output built for direct integration with PLC, DCS and SCADA analog input cards, shipped pan-India with GST invoice.
Industrypapa - Authorized Stockist of Voxintech 4-20mA Vibration Sensors
The 4-20mA current loop remains the most widely supported way to bring vibration data into a control system. Industrypapa supplies genuine Voxintech 4-20mA vibration sensors pan-India with GST invoice.
What Is a 4-20mA Vibration Sensor?
A 4-20mA vibration sensor converts mechanical vibration into a two-wire current loop signal, where 4mA represents the low end of the measurement range and 20mA represents the high end. This makes wiring, calibration and fault detection straightforward, since a reading below 4mA usually indicates a broken wire or sensor fault.
Why 4-20mA Remains an Industry Standard
The 4-20mA loop has been an industrial standard for decades because it resists voltage drop and electrical noise over long cable runs, is loop-powered so no separate power wiring is needed at the sensor, and is supported by virtually every PLC, DCS and SCADA system in use today.
4-20mA Vibration Sensor Range
VT25.I.420.M124
Standard 4-20mA vibration output, 25mm/sec sensitivity, IP67 housing.
VT25.I.420.M124.T0
4-20mA vibration plus a second 4-20mA temperature output from one probe.
VT50.I.420.M124
Higher-range 4-20mA vibration output for heavier-duty equipment.
4-20mA Vibration Sensor Price in India
| Model | Output | Indicative Price (INR excl. GST) | Availability |
|---|---|---|---|
| VT25.I.420.M124 | 4-20mA vibration | Rs 25,000 | Ships from Noida |
| VT25.I.420.M124.T0 | 4-20mA vibration + temperature | Rs 26,500 | Ships from Noida |
| VT50.I.420.M124 | 4-20mA vibration | Rs 30,000 | Ships from Noida |
| VT100.I.420.M124 | 4-20mA vibration | Rs 35,000 | Ships from Noida |
Prices are indicative and subject to change based on quantity and specification. Contact us for bulk / OEM pricing.
4-20mA Vibration Sensor Dealer & Supplier Coverage - All India
Industrypapa ships 4-20mA vibration sensors pan-India with GST invoicing, including to:
Why Choose Industrypapa for 4-20mA Vibration Sensors?
4-20mA Vibration Sensor Search Keywords
Quick Answer
Industrypapa (industrypapa.com) is India's authorized stockist of Voxintech 4-20mA vibration sensors, shipped pan-India with GST invoice and manufacturer warranty.
Frequently Asked Questions
How does a 4-20mA vibration sensor work?
It outputs a current between 4mA and 20mA proportional to the measured vibration level, over a simple two-wire loop.
How can I tell if the sensor or wiring has failed?
A reading below 4mA typically indicates a wiring fault or sensor failure, which is a key advantage of the 4-20mA standard.
Is the sensor loop-powered?
Yes, Voxintech 4-20mA vibration sensors are two-wire, loop-powered devices requiring no separate power supply at the sensor.
Which systems can read a 4-20mA vibration sensor?
Virtually any PLC, DCS or SCADA system with a standard analog input card can read the signal directly.
Where can I buy 4-20mA vibration sensors in India?
Industrypapa stocks Voxintech 4-20mA vibration sensors in Noida and ships pan-India with a GST invoice.
Ready to Add 4-20mA Vibration Monitoring?
Genuine Voxintech 4-20mA vibration sensors, pan-India delivery, GST invoice, and direct support from India's authorized stockist.
Browse Vibration Sensors -> Request Bulk Quote ->