Datalogic S70-5-E1-P Fiber Optic Amplifier PNP – Supplier in India
The Datalogic S70-5-E1-P is a long-distance fibre optic amplifier with red LED emission, a double digital display and a PNP output. This Datalogic photoelectric sensor detects very small and very fast objects in tight spaces using thin fibre optic cables. Industrypapa supplies it as a Datalogic sensor distributor in India, with GST invoice and pan-India dispatch.
By Industrypapa Technical Team · 4 min read · Updated October 2026
Datalogic S70-5-E1-P in brief
- What it is: a Datalogic S70 fiber optic amplifier, long-distance E1 type
- Light: red LED, works with any 2.2 mm fibre optic
- Output: 1 PNP switching output
- Display: double display shows live signal and threshold together
- Speed: 200 µs high speed up to 5 ms extra long range
Order the S70-5-E1-P
What is a fibre optic amplifier?
A fibre optic amplifier is a photoelectric sensor in two parts. The amplifier holds the light source, receiver, display and output on a DIN rail, and thin fibre cables carry the light to the machine. The sensing tip can be tiny, so a fiber optic sensor amplifier fits where a normal sensor cannot.
The Datasensing S70 (formerly Datalogic) E1 version gives extra light power for long fibre runs and low-contrast targets. The S70-5-E1-P has a plain PNP output; choose the S70-5-E1-PZ if you need IO-Link.
S70-5-E1-P specifications
| Parameter | Value |
|---|---|
| Brand | Datalogic (Datasensing) |
| Model | S70-5-E1-P |
| Product type | Fibre optic amplifier |
| Series | S70 – E1 long-distance type |
| Emission | Red LED |
| Display | Double digital display |
| Output | PNP |
| Response time (E1) | 200 µs · 500 µs · 2 ms · 5 ms (selectable) |
| Fibre compatibility | Any 2.2 mm fibre optic |
| Connection | M8 4-pin connector |
| Mounting | DIN rail |
Always confirm details against the latest Datalogic / Datasensing datasheet for your application.
Why choose the Datalogic S70-5-E1-P
- Double display: see signal and threshold together for quick set-up
- Four speed modes: from 200 µs high speed to 5 ms extra long range
- Long-distance E1 type: margin for long fibres and low contrast
- Simple PNP output: wires straight to sourcing PLC inputs
- Universal fibres: any 2.2 mm plastic or glass fibre
Typical applications
- Small part and component detection
- Electronics and semiconductor assembly
- Label and edge detection
- High-speed packaging lines
- Detection in hot or tight areas with special fibres
Installation and setup tips
Snap the amplifier on a DIN rail and connect the M8 cable to 24 V DC and a PNP PLC input. Cut the 2.2 mm fibres cleanly and push them fully home. Pick the response mode for your line speed, teach the threshold with and without the target, and confirm on the double display.
Datalogic sensor distributor in India
Industrypapa supplies Datalogic sensors and accessories across India, including Delhi NCR, Mumbai, Pune, Ahmedabad, Bengaluru, Chennai, Hyderabad and Kolkata. Every order includes a GST invoice. For the S70-5-E1-P price in India, send the model and quantity on WhatsApp. See more on our Datalogic sensors page, or related products: Datalogic S70-5-E1-PZ (IO-Link).
Frequently asked questions
What is the difference between S70-5-E1-P and S70-5-E1-PZ?
Both are long-distance E1 amplifiers with a double display and PNP output. The PZ adds IO-Link.
Is the S70-5-E1-P a photoelectric sensor?
Yes. It is a photoelectric sensor in fibre optic amplifier form; the fibres carry the light to the detection point.
Which fibres can I use?
Any 2.2 mm fibre optic, including proximity, through-beam, coaxial and high-temperature fibres.
What response time does it have?
Selectable 200 µs, 500 µs, 2 ms or 5 ms.
What connection does it use?
An M8 4-pin connector.
Do you supply it across India?
Yes, with GST invoice, pan-India delivery and export on request.
