Datalogic S70-5-E1-PZ Fiber Optic Amplifier with IO-Link – Supplier in India
The Datalogic S70-5-E1-PZ (order code 950561030) is a long-distance fibre optic amplifier with red LED emission, a double digital display and a PNP output with IO-Link. This Datalogic photoelectric sensor detects very small and very fast objects in tight spaces. Industrypapa supplies it as a Datalogic sensor distributor in India, with GST invoice and pan-India dispatch.
By Industrypapa Technical Team · 5 min read · Updated October 2026
Datalogic S70-5-E1-PZ in brief
- What it is: a Datalogic S70 fiber optic amplifier, long-distance E1 type
- Light: red LED, works with any 2.2 mm fibre optic
- Output: 1 PNP output with IO-Link for PLC set-up and diagnostics
- Display: double display shows live signal and threshold together
- Speed: 200 µs in high-speed mode, up to 5 ms in extra-long-range mode
Order the S70-5-E1-PZ photoelectric sensor
What is a fibre optic amplifier?
A fibre optic amplifier is a photoelectric sensor split in two parts. The amplifier holds the light source, receiver, display and output on a DIN rail inside the panel. Thin fibre optic cables carry the light to the machine, where the sensing head can be as small as a needle. This makes a fiber optic sensor amplifier the right choice for tiny parts, narrow gaps, heat and fast-moving objects where a normal photoelectric sensor will not fit.
The Datasensing S70 series (formerly Datalogic) is designed for high-resolution, high-speed detection. The E1 version in the S70-5-E1-PZ is the long-distance type, giving extra light power for long fibre runs and dusty or low-contrast conditions.
S70-5-E1-PZ specifications
| Parameter | Value |
|---|---|
| Brand | Datalogic (Datasensing) |
| Model | S70-5-E1-PZ |
| Order code | 950561030 |
| Product type | Fibre optic amplifier (fiber optic photoelectric sensor) |
| Series | S70 – E1 long-distance type |
| Emission | Red LED |
| Display | Double digital display (signal level and threshold) |
| Output | 1 PNP switching output with IO-Link |
| Response time (E1) | 200 µs high speed · 500 µs standard · 2 ms long range · 5 ms extra long range |
| Fibre compatibility | Any 2.2 mm plastic or glass fibre optic |
| Connection | M8 4-pin connector |
| Mounting | DIN rail (CRD-5000 bracket accessory) |
| Warranty | 3 years (manufacturer) |
Always confirm details against the latest Datalogic datasheet for your application.
Why choose the IO-Link fibre amplifier S70-5-E1-PZ
- IO-Link: change settings, read signal levels and spot dirty fibres from the PLC, with no panel visits
- Double display: see signal and threshold at the same time for quick, accurate set-up
- Four speed modes: choose from 200 µs high speed to 5 ms extra long range
- Long-distance E1 type: extra margin for long fibres and low-contrast targets
- Universal fibres: works with any 2.2 mm Datalogic or standard fibre optic
Typical applications
- Small part and component detection in assembly machines
- Electronics, PCB and semiconductor handling
- Label, edge and thread detection
- High-speed packaging and bottling lines
- Detection in hot or tight areas using special fibres
Installation and setup tips
Snap the amplifier onto a DIN rail and connect the M8 4-pin cable to 24 V DC and the PLC input (PNP). Cut the 2.2 mm fibres cleanly with the fibre cutter and push them fully into the amplifier. Choose the response mode that suits the line speed, teach the threshold with the target present and absent, and check the double display. With IO-Link, store the settings in the master so a replacement amplifier is set up automatically.
Datalogic sensor distributor in India
Industrypapa supplies Datalogic fibre optic sensors, amplifiers, photoelectric sensors and accessories across India, including Delhi NCR, Mumbai, Pune, Ahmedabad, Bengaluru, Chennai, Hyderabad and Kolkata. Every order includes a GST invoice. For the Datalogic S70 price in India, send the model and quantity on WhatsApp. See the full range on our Datalogic sensors page, or the PNP version without IO-Link: Datalogic S70-5-E1-P.
Frequently asked questions
Is the S70-5-E1-PZ a photoelectric sensor or a fibre optic amplifier?
Both. It is a photoelectric sensor in the form of a fibre optic amplifier: the light source, receiver and display sit in the DIN-rail amplifier, and a fibre cable carries the light to the detection point.
What is the order code of the Datalogic S70-5-E1-PZ?
The order code is 950561030. Quote the model and code together for a fast, exact quotation.
What does PZ mean in S70-5-E1-PZ?
P is the PNP output and Z marks the IO-Link version, so you can set up and monitor the amplifier from the PLC.
What is the difference between S70-5-E1-P and S70-5-E1-PZ?
Both are long-distance E1 amplifiers with PNP output and a double display. The PZ adds IO-Link communication.
What response time does it have?
The E1 type offers 200 µs (high speed), 500 µs (standard), 2 ms (long range) and 5 ms (extra long range).
Which fibres can I use?
Any 2.2 mm fibre optic, including Datalogic proximity, through-beam, coaxial, array, focused and high-temperature fibres.
What connection does it use?
An M8 4-pin connector; matching M8 cables are available in 3, 5 and 10 m.
Do you supply the S70-5-E1-PZ across India?
Yes. Industrypapa is a Datalogic sensor distributor in India, with GST invoice, pan-India delivery and export on request.