Junction Boxes · M12 Sensor Distribution · Voxintech
Looking for an Autonics PT Series Alternative? A Like-for-Like Cross-Reference
A factual cross-reference for Autonics PT sensor distribution boxes: how to decode the part number and match ports, signals, logic and cable on an alternative.
- Ex-Stock in Noida
- IP67 Fully Potted
- Dual Channel
- 4 – 10 Ports
- GST Invoice
- Pan-India Dispatch
Ports
4 / 6 / 8 / 10
Channels
Dual
Protection
IP67 potted
From
₹11,344
Autonics PT series distribution boxes are a well-regarded, widely stocked choice, and for good reason. But there are legitimate situations where a buyer needs an alternative: a shorter cable option, a higher port count, faster local stock, or simply a second source. This guide explains how to read the PT part number so you can match a box like for like, and it is written to help you specify correctly, not to knock a good product.
First, decode the Autonics PT part number
The PT naming is logical once you know the fields. Reading a typical 5-pin part such as PT8-4DP5-5:
- PT: the distribution box series.
- 8: the number of ports (also 4 or 6).
- 4D: the connection type. 4D means DC 4-wire, that is two signals per port (dual channel). 3D means DC 3-wire, one signal per port (single channel).
- P: the output logic. P is PNP; N is NPN.
- 5: the connector, 5-pin.
- -5: the cable length in metres (for example -5 or -10).
So PT8-4DP5-5 is an 8-port, dual-channel, PNP, 5-pin box with a 5 m cable, and PT8-3DP5-5 is the single-channel version of the same box. Once you can read the code, matching an alternative is simply a matter of matching each field.
What to match on a replacement
A like-for-like alternative should match five things:
- Port count: 4, 6 or 8 to match the station.
- Signals per port: dual channel (2 signals) or single channel (1 signal).
- Output logic: PNP or NPN, to match your sensors so the LEDs indicate correctly.
- Connector and pinout: 5-pin A-coded is the shared standard, so cordsets carry over.
- Cable length: 2 m, 5 m or 10 m as your mounting position requires.
Match those and the alternative drops into the same footprint on the machine, using the same sensor cordsets and the same PLC inputs. It is worth confirming the mounting-hole centres if you want a no-drill swap.
Legitimate reasons to look for an alternative
- Cable length: the PT cable range starts at 5 m. If you need a 2 m box for a compact machine, an alternative that offers 2 m keeps your cable tray tidy and your price sharp.
- Port count: the PT series tops out at 8 ports. A machine needing twenty signals on one cable needs a 10-port box, which means looking beyond the standard PT range.
- Local stock and lead time: a second source with ex-stock local availability protects your build schedule when a preferred part is on back-order.
- A second supplier: dual-sourcing a commodity item is simply good procurement practice.
Being fair: where Autonics is the easy choice
It is worth being honest. Autonics enjoys strong brand recognition in India and is often the default write-in on a machine drawing, and that trust has real value. If your customer has specified Autonics by name and is happy with the price and availability, there may be no reason to change. An alternative earns its place on the specific merits above: cable length, port count, stock, or sourcing strategy. This guide is here for when one of those applies.
How to specify the alternative
Write down the Autonics part number you are replacing, decode it into ports, channel, logic and cable using the key above, and match each field on the alternative. Confirm the output logic against your sensors, and cap any unused ports to hold the IP rating. Done that way, the swap is routine and the machine behaves identically.
M12 Sensor Junction Boxes In Stock
Voxintech VXT-JB series — fully potted IP67 dual-channel distribution boxes, 4 to 10 ports, with 2 m, 5 m or 10 m home-run cable. Held in Noida for ex-stock dispatch across India.
Prices are per unit, exclusive of GST. Click any part number for the full datasheet, dimensions and current stock position.
Ports, Cable Length and Price at a Glance
Every combination is a stocked part number. Prices exclude GST.
| Model | 2 m cable | 5 m cable | 10 m cable |
|---|---|---|---|
| 4-port dual channel | ₹11,446 | ₹14,568 | ₹19,566 |
| 6-port dual channel | ₹11,966 | ₹15,088 | ₹21,336 |
| 8-port dual channel | ₹12,290 | ₹16,606 | ₹21,486 |
| 10-port dual channel | ₹13,114 | ₹16,966 | ₹11,344 |
Frequently Asked Questions
What does PT8-4DP5-5 mean?
How do I find an equivalent to an Autonics PT box?
When is an alternative worth it over Autonics?
Need Help Choosing a Junction Box?
Voxintech stocks M12 sensor distribution boxes from 4 to 10 ports in Noida, Delhi NCR, with datasheets, GST invoicing and ex-stock dispatch. Send us your sensor count and we will size the right box for your machine.
Read Next
Note: This article describes M12 sensor distribution boxes using engineering practice that applies across manufacturers. Voxintech VXT-JB series specifications, prices and stock shown above are current at the time of publication and exclude GST; confirm the datasheet and current stock position before ordering. Autonics and other brand names are the trademarks of their respective owners and are referenced for comparison only.