Junction Boxes · M12 Sensor Distribution · Voxintech
What Is an M12 Sensor Junction Box? The Complete Guide
An M12 sensor junction box brings many sensor signals back to the panel on one cable. Learn how they work, the main types, and how to choose one.
- Ex-Stock in Noida
- IP67 Fully Potted
- Dual Channel
- 4 – 10 Ports
- GST Invoice
- Pan-India Dispatch
Ports
4 / 6 / 8 / 10
Channels
Dual
Protection
IP67 potted
From
₹11,344
An M12 sensor junction box, also called a sensor distribution box or splitter box, is a passive device that collects the signals from several sensors and carries them back to the control panel on a single cable. Instead of running one cable from every sensor all the way to the cabinet, each sensor plugs into a nearby box with a short cordset, and one multi-core home-run cable does the long trip. It is one of the simplest ways to cut wiring cost, tidy a machine, and speed up fault-finding.
What a junction box actually does
A machine can easily carry twenty or thirty proximity, photoelectric and reed switches. Wired individually, that is twenty or thirty cables threading through trunking to the panel, each needing its own gland and its own set of terminals. A distribution box consolidates that. Sensors plug into M12 ports on the box using standard cordsets; the box combines every signal onto one home-run cable with a single connector or a single gland at the panel end.
The box is passive: it contains no logic and no power supply of its own. It carries 24 V DC out to the sensors and brings their switching signals back. Because there is nothing active inside, it is extremely reliable and needs no configuration.
The anatomy of a distribution box
Whatever the brand, the parts are the same:
- Ports: 4, 6, 8 or 10 female M12 sockets, usually A-coded, where the sensors plug in.
- Home-run cable or connector: the single multi-core trunk back to the panel, either a fixed moulded cable or an M23 quick-disconnect.
- Status LEDs: a power LED plus one LED per signal, so a technician can read sensor state at the machine.
- Housing: a sealed, often fully epoxy-potted body rated to IP67 so it survives dust, coolant and wash-down.
Why use one instead of wiring sensors directly
- Less cable and fewer glands: one home-run replaces many individual runs, so trunking is smaller and cheaper.
- Faster wiring: plugging in cordsets is quicker and less error-prone than landing dozens of cores on terminals.
- Quicker diagnostics: LEDs at the box show which sensor is switched without a meter or a trip to the panel.
- Cleaner maintenance: a faulty sensor is unplugged and swapped in seconds, with no rewiring.
The main types you will see
By port count
4-port boxes suit compact machines and single stations; 6- and 8-port boxes are the workhorses of packaging and assembly lines; 10-port boxes handle high-density stations and long conveyors where twenty signals share one cable.
By channel (signals per port)
Single-channel boxes carry one signal per port. Dual-channel boxes carry two, which suits double-acting pneumatic cylinders that use two magnetic sensors. A dual-channel box can also take a single-signal sensor on one channel, so it covers both cases.
By output logic
Boxes are configured for PNP (sourcing) or NPN (sinking) sensors. This mainly affects how the status LEDs are wired, but sensor, box and PLC input should all agree.
By home-run type
A fixed moulded cable is simplest and cheapest. An M23 quick-disconnect lets the trunk cable be unplugged, which some machine builders prefer for servicing.
Key specifications to check before you buy
- Number of ports and signals per port (single or dual channel).
- Output logic: PNP or NPN.
- Home-run cable length and connector type.
- IP rating and housing construction (potted vs terminal-strip).
- Pinout: the near-universal 5-pin A-coded standard accepts cordsets from any brand.
M12 Sensor Junction Boxes In Stock
Voxintech VXT-JB series — fully potted IP67 dual-channel distribution boxes, 4 to 10 ports, with 2 m, 5 m or 10 m home-run cable. Held in Noida for ex-stock dispatch across India.
Prices are per unit, exclusive of GST. Click any part number for the full datasheet, dimensions and current stock position.
Ports, Cable Length and Price at a Glance
Every combination is a stocked part number. Prices exclude GST.
| Model | 2 m cable | 5 m cable | 10 m cable |
|---|---|---|---|
| 4-port dual channel | ₹11,446 | ₹14,568 | ₹19,566 |
| 6-port dual channel | ₹11,966 | ₹15,088 | ₹21,336 |
| 8-port dual channel | ₹12,290 | ₹16,606 | ₹21,486 |
| 10-port dual channel | ₹13,114 | ₹16,966 | ₹11,344 |
Frequently Asked Questions
Is a junction box the same as a distribution box or a splitter box?
Does a junction box need power or programming?
Can I mix sensor brands on one box?
Need Help Choosing a Junction Box?
Voxintech stocks M12 sensor distribution boxes from 4 to 10 ports in Noida, Delhi NCR, with datasheets, GST invoicing and ex-stock dispatch. Send us your sensor count and we will size the right box for your machine.
Read Next
Note: This article describes M12 sensor distribution boxes using engineering practice that applies across manufacturers. Voxintech VXT-JB series specifications, prices and stock shown above are current at the time of publication and exclude GST; confirm the datasheet and current stock position before ordering. Autonics and other brand names are the trademarks of their respective owners and are referenced for comparison only.